Alternator Tightening Procedure - AR15.40-P-5032-03MR
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 274
MODIFICATION NOTES
| 23.03.2016 | Bolt alternator to timing case | Engine 274 | BA15.40-P-1001-01F |
ALTERNATOR
| Number | Designation | Engine 274 | ||
|---|---|---|---|---|
| BA15.40-P-1001-01F | Bolt, alternator to timing case | Stage 1 | Nm | 8 |
| Stage 2 | Nm | 20 | ||
Always adhere to the specified tightening sequence.
- Screw upper and lower screw/bolt of the alternator into the timing case.
- Tighten down upper screw/bolt of the alternator to Stage 1
.
- Tighten down lower screw/bolt of the alternator to Stage 1
- Tighten down upper screw/bolt of the alternator to Stage 2
- Tighten down lower screw/bolt of the alternator to Stage 2