000 588 02 71 00 Pump - WS47.00-P-0017B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Engine all (4xWD, CAR, Heavy transporter, Light transporter, smart)

Use in FG 47/Set B

Purpose:

Transfer feed pump for transferring gas and diesel fuel during repair and servicing.

Reference information:

Sale of this workshop equipment does not take over the regular replacement part ordering process in GLC/LC, but instead directly over the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier can be found in the maintenance system document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Each of the devices listed below are delivered with an extraction probes set. This at least consists of a standard extraction probe (outside diameter 12 mm) and an emergency extraction probe (outside diameter 6 mm).

Manufacturer 1

GL-GmbH Werkstatttechnik

Nurtinger Strasse 23-25

72636 Frickenhausen, Germany

Germany

http://gl-gmbh.de

Model: Tankprimus 100 (110 liter) Article no.:400 100
Model: Tankprimus 80 (88 liter) Article no.:400 080

Manufacturer 2

Plank GmbH

Von-Gumppenberg-Str. 4

86554 Pottmes

Germany

http://www.hellgeth.de

Model: SORB-AS 2.0 (120 Liter) Article no.:170020-MB
Model: SORB-AS 2.0 (200 Liter) Article no.:170021-MB