Wiring Diagram For Collision Prevention Assist Control Unit - PE30.30-P-2104FBA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 177, 274, 276, 626, 651 in model 205
up to model year 2019
with code 258 (COLLISION PREVENTION ASSIST)
Control unit A90
Engine 177, 274, 276, 642, 651 in model 253 (except 253.99)
up to model year 2020
with code 258 (COLLISION PREVENTION ASSIST)
Control unit A90
| Wiring diagram for collision warning system control unit | PE30.30-P-2104-97FBA | ||
| Location and assignment of line and plug connectors | GF00.19-P-1000FBA | ||
| Location and assignment of ground points | GF00.19-P-2000FBA | ||
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-P-3000FBA | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FBA | ||
| Use of wiring diagrams | OV00.01-P-1901-03FBA | ||
| Search aid for all electrical components | OV00.01-P-1909FBA |