Steering Gear - BA46.20-P-1000-01Q
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 238, 253, 257, 290, 293
STEERING GEAR
| Number | Designation | Model 205, 213, 238, 257 except code M005 (4MATIC) | Model 205, 213, 238, 257 with code M005 (4MATIC) | |||
|---|---|---|---|---|---|---|
| BA46.20-P-1001-01Q | Bolt, electric rack-and-pinion steering to front axle carrier | M8/M10 | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | |||
| M12 | Stage 1 | Nm | 100 | 100 | ||
| Stage 2 | ∠° | 90 | 90 | |||
| BA46.20-P-1002-01Q | Screw/bolt, rack-and-pinion steering mounting plate to front axle carrier | M10 | Nm | 50 | 50 | |
| BA46.20-P-1003-01Q | Bolt, water drain valve to electric rack-and-pinion steering | Nm | 20 | 20 | ||
| BA46.20-P-1004-01Q | Toothed rack | Test torque | Nm | 20 | 12 | |
| BA46.20-P-1005-01Q | Adjusting screw to rack-and-pinion steering | Nm | 60 | 60 | ||
STEERING GEAR
| Number | Designation | Model 253 | Model 290 | |||
|---|---|---|---|---|---|---|
| BA46.20-P-1001-01Q | Bolt, electric rack-and-pinion steering to front axle carrier | M8/M10 | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 90 | 90 | |||
| M12 | Stage 1 | Nm | 100 | 100 | ||
| Stage 2 | ∠° | 90 | 90 | |||
| BA46.20-P-1002-01Q | Screw/bolt, rack-and-pinion steering mounting plate to front axle carrier | M10 | Nm | 50 | 50 | |
| BA46.20-P-1003-01Q | Bolt, water drain valve to electric rack-and-pinion steering | Nm | 20 | - | ||
| BA46.20-P-1004-01Q | Toothed rack | Test torque | Nm | 12 | 20 | |
| BA46.20-P-1005-01Q | Adjusting screw to rack-and-pinion steering | Nm | 60 | 60 | ||
STEERING GEAR
| Number | Designation | Model 293 | |||
|---|---|---|---|---|---|
| BA46.20-P-1001-01Q | Bolt, electric rack-and-pinion steering to front axle carrier | M8/M10 | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | |||
| M12 | Stage 1 | Nm | 100 | ||
| Stage 2 | ∠° | 90 | |||
| BA46.20-P-1002-01Q | Screw/bolt, rack-and-pinion steering mounting plate to front axle carrier | M10 | Nm | 50 | |
| BA46.20-P-1003-01Q | Bolt, water drain valve to electric rack-and-pinion steering | Nm | 20 | ||
| BA46.20-P-1004-01Q | Toothed rack | Test torque | Nm | 20 | |
| BA46.20-P-1005-01Q | Adjusting screw to rack-and-pinion steering | Nm | 60 | ||