Separate And Connect Steering Coupling - AR46.10-P-8000-01LWA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.0/1/2, 213, 253
with code 700 (Vehicle production location China)
STEERING SHAFT
| Number | Designation | Model 205 | Model 213 | ||
|---|---|---|---|---|---|
| BA46.10-P-1003-01N | Self-locking bolt, steering coupling to lower steering shaft | Stage 1 | Nm | 25 | 25 |
| Stage 2 | ∠° | 90 | 90 | ||
STEERING SHAFT
| Number | Designation | Model 253 | ||
|---|---|---|---|---|
| BA46.10-P-1003-01N | Self-locking bolt, steering coupling to lower steering shaft | Stage 1 | Nm | 25 |
| Stage 2 | ∠° | 90 | ||
Disconnect
- Unscrew bolt (7).
- Pull steering shaft (3) in direction of arrow out of steering coupling (1).
Pay attention to installation position.
Connecting
- Insert steering shaft (3) in direction of arrow into steering coupling (1) and slide in until the holes line up for the bolt (7).
- Screw in bolt (7) and tighten
.