Remove/Install Steering Wheel - AR46.10-P-0100LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
Model 213
Model 238
Model 253, 293
MODIFICATION NOTES
| 29.03.2018 | General note on safety-relevant component parts added. | ||
| 20.06.2018 | Information on handling bolt revised. | Operation step 3 |
Shown on model 205
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Turn steering wheel (1) to center position. | ||
| 2 | Remove airbag unit from steering wheel (1). | AR91.60-P-0660LW | |
| 3 | Counterhold steering wheel (1) and remove bolt (2). | If the bolt (2) already bears a marking (color dot) ↓ replace the bolt (2). |
*BA46.10-P-1001-02J |
| 4 | Release and disconnect electrical connection (3). | ||
| 5 | Remove steering wheel (1). | Model 213.### 1# Model 238.### 1# Model 253.### 1#, 293.### 1# Installation: Align recesses of the splines (arrows A) in steering wheel (1) with the markings (a) on the steering shaft. Model 213.### 2# Model 238.### 2# Model 253.### 2#, 293.### 2# Installation: Align recesses of the splines (arrows A) in steering wheel (1) with the markings (b) on the steering shaft. |
|
| 6 | Install in the reverse order. |
STEERING WHEEL
| Number | Designation | Model 205 | Model 213 | |
|---|---|---|---|---|
| BA46.10-P-1001-02J | Screw/bolt, steering wheel to steering shaft | Nm | 80 | 80 |
STEERING WHEEL
| Number | Designation | Model 238 | Model 253 | |
|---|---|---|---|---|
| BA46.10-P-1001-02J | Screw/bolt, steering wheel to steering shaft | Nm | 80 | 80 |
STEERING WHEEL
| Number | Designation | Model 293 | |
|---|---|---|---|
| BA46.10-P-1001-02J | Screw/bolt, steering wheel to steering shaft | Nm | 80 |