Rear Axle Shock Absorber - BA32.25-P-1000-03P
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 206, 213, 238, 253, 257, 290, 293
REAR AXLE SHOCK ABSORBER
| Number | Designation | Model 206 | Model 205 | |||
|---|---|---|---|---|---|---|
| BA32.25-P-1001-03P | Self-locking nut, shock absorber to spring control arm | Air suspension | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 90 | 90 | |||
| Steel suspension | Stage 1 | Nm | 100 | 45 | ||
| Stage 2 | ∠° | 90 | 90 | |||
| BA32.25-P-1002-03P | Bolt, shock absorber to body | Stage 1 | Nm | 15 | 15 | |
| Stage 2 | Nm | 36 | 36 | |||
| BA32.25-P-1003-03P | Nut, support bushing to shock absorber (piston rod) | M10 | Nm | - | 31 | |
REAR AXLE SHOCK ABSORBER
| Number | Designation | Model 213 | Model 238 | |||
|---|---|---|---|---|---|---|
| BA32.25-P-1001-03P | Self-locking nut, shock absorber to spring control arm | Air suspension | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 90 | 90 | |||
| Steel suspension | Stage 1 | Nm | 60 | 45 | ||
| Stage 2 | ∠° | 60 | 90 | |||
| BA32.25-P-1002-03P | Bolt, shock absorber to body | Stage 1 | Nm | 15 | 15 | |
| Stage 2 | Nm | 36 | 36 | |||
| BA32.25-P-1003-03P | Nut, support bushing to shock absorber (piston rod) | M10 | Nm | 31 | 31 | |
REAR AXLE SHOCK ABSORBER
| Number | Designation | Model 253 | Model 257 | |||
|---|---|---|---|---|---|---|
| BA32.25-P-1001-03P | Self-locking nut, shock absorber to spring control arm | Air suspension | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 90 | 90 | |||
| Steel suspension | Stage 1 | Nm | 45 | 60 | ||
| Stage 2 | ∠° | 90 | 60 | |||
| BA32.25-P-1002-03P | Bolt, shock absorber to body | Stage 1 | Nm | 15 | 15 | |
| Stage 2 | Nm | 36 | 36 | |||
| BA32.25-P-1003-03P | Nut, support bushing to shock absorber (piston rod) | M10 | Nm | 31 | 31 | |
REAR AXLE SHOCK ABSORBER
| Number | Designation | Model 290 | Model 293 | |||
|---|---|---|---|---|---|---|
| BA32.25-P-1001-03P | Self-locking nut, shock absorber to spring control arm | Air suspension | Stage 1 | Nm | 100 | 100 |
| Stage 2 | ∠° | 90 | 90 | |||
| Steel suspension | Stage 1 | Nm | 100 | - | ||
| Stage 2 | ∠° | 90 | - | |||
| BA32.25-P-1002-03P | Bolt, shock absorber to body | Stage 1 | Nm | 15 | 15 | |
| Stage 2 | Nm | 36 | 36 | |||
| BA32.25-P-1003-03P | Nut, support bushing to shock absorber (piston rod) | M10 | Nm | 29 | 31 | |