Remove/Install Adaptive Damping System (ADS) Control Unit - AR32.32-P-0003LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
with code 459 (DYNAMIC BODY CONTROL suspension with adjustment damping)
Model 205
with code 488 (Steel/air suspension)
Model 253
with code 459 (DYNAMIC BODY CONTROL suspension with adjustment damping)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Commission adaptive damping system control unit (N51/5). | When replacing the adaptive damping system control unit (N51/5). | |
| AD00.00-P-2000-04B | |||
| 2 | Remove left front seat. | Model 205.0/1/2/3 with code 459 (DYNAMIC BODY CONTROL suspension with adjustment damping) Model 205.0/1/2/3 with code 488 (Steel/air suspension) Model 253 with code 459 (DYNAMIC BODY CONTROL suspension with adjustment damping) |
AR91.10-P-1000LW |
| Model 205.4 with code 459 (DYNAMIC BODY CONTROL suspension with adjustment damping) Model 205.4 with code 488 (Steel/air suspension) |
AR91.10-P-1000LWR | ||
| 3 | Remove electrical wiring harness (3) from air duct | ||
| Fig 2 | |||
| 4 | Release air duct (1) (arrows A) and remove. | ||
| 5 | Carefully lift up floor covering (2). | ||
| 6 | Unclip adaptive damping system control unit (N51/5) from catch hooks (5) and pull out towards vehicle center (arrows B). | ||
| 7 | Disconnect electrical connectors (6) and remove adaptive damping system control unit (N51/5). | ||
| 8 | Install in the reverse order. |