Wiring Diagram For Carsharing Control Unit - PE82.85-P-2112-97FCA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253 (except 253.99) as of model year 2020
Control unit N26/10
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| CAN D | Diagnostic CAN | 8K |
| CAN D | Diagnostic CAN | 11K |
| K40/6 | Driver-side fuse and relay module | 5L |
| K40/6f205 | Fuse 205 | 3L |
| N112/9 | HERMES control unit | 11L |
| N26/10 | Carsharing control unit | 5A |
| N26/10 | Carsharing control unit | 17A |
| N26/10 | Carsharing control unit | 26A |
| N73 | Electronic ignition switch control unit | 8L |
| W34/3 | Right footwell ground point | 4E |
| X11/4 | Diagnostic connector | 8L |
| Z35/12z3 | Diagnostic CAN (CAN D) low connector sleeve | 8G |
| Z35/13z3 | Diagnostic CAN (CAN D) high connector sleeve | 7G |