Wiring Diagram Of Reversing Camera - PE54.65-P-2103-97FBA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
up to model year 2019
with code 218 (Rear view camera)
Control unit B84/3
Model 253 (except 253.99)
up to model year 2020
with code 218 (Rear view camera)
Control unit B84/3
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 32L |
| A26/17 | Head unit | 24L |
| B84/3 | Backup camera | 12A |
| B84/3 | Backup camera | 20A |
| B84/3x1 | Reversing camera electrical connector 1 | 2H |
| B84/3x1 | Reversing camera electrical connector 1 | 12F |
| B84/3x2 | Reversing camera electrical connector 2 | 23E |
| CAN HMI | User interface CAN | 8K |
| CAN HMI | User interface CAN | 18K |
| Code FA | CABRIOLET | 1D |
| Code FA | CABRIOLET | 11D |
| Code FA | CABRIOLET | 20F |
| Code FA | CABRIOLET | 24F |
| K40/5 | Rear fuse and relay module | 4L |
| K40/5 | Rear fuse and relay module | 14L |
| K40/5f417 | Fuse 417 | 3L |
| K40/5f417 | Fuse 417 | 12L |
| W6 | Left wheel arch trunk ground point | 6L |
| W6 | Left wheel arch trunk ground point | 16L |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 8L |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 18L |
| X8/4 | Trunk lid/liftgate electrical connector | 12H |
| X8/4 | Trunk lid/liftgate electrical connector | 21H |