Wiring Diagram For Backup Camera Control Unit - PE54.65-P-2102-97FCA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253 (except 253.99)
as of model year 2020
with code 218 (Rear view camera)
Control unit N66/2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| A26/17 | Head unit | 12L |
| CAN HMI | User interface CAN | 8K |
| Code 235 | Active Park Assist | 14A |
| Code 501 | 360 degree camera | 14A |
| K40/5 | Rear fuse and relay module | 5L |
| K40/5f417 | Fuse 417 | 4L |
| M35/2 | Rear camera cover motor | 17L |
| N10/8 | Rear SAM control unit | 18A |
| N66/2 | Backup camera control unit | 4A |
| N66/2 | Backup camera control unit | 11A |
| N66/2 | Backup camera control unit | 25A |
| N66/2 | Backup camera control unit | 37A |
| N66/2x1 | Reversing camera control unit electrical connector 1 | 1F |
| N66/2x2 | Reversing camera control unit electrical connector 2 | 10E |
| W6 | Left wheel arch trunk ground point | 4E |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 8L |