LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Overall Vehicle - 253 Chassis 7 Of 9) >> Capacities & Specifications >> Specified Hydraulic Fluids - Overview - BB00.40-P-0340-01A

Specified Hydraulic Fluids - Overview - BB00.40-P-0340-01A

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model all (4xWD, CAR, Heavy transporter, Light transporter) 

Cars
  Sheet
Major assembly SAE grade 342.0 343.0 344.0 345.0 346.0
Model 600 convenience hydraulic system, model V 140 special protection for hydraulic power window assemblies, model V 220 with code Z07 (Highest protection)   •        
Level control system, hydropneumatic suspension, hydraulic system of ASD, 4MATIC and soft top     •      
Model 164, 166, 168, 171, 172, 190, 197, 199, 203, 204, 207, 209, 211, 212, 215, 216, 217, 219, 220, 221, 222, 230, 231, 240, 251, 292         •  
Tandem pumps with common oil reservoir for steering and level control: Model 203.2, 210       •    
Electrohydraulic power steering pump: Model 164 Hybrid, 164 Fuel Economy, 251         •  
Hydraulic window lifter: Model 221 with code Z07 (Highest protection)         •  
Active Roll Stabilization: Model 166 with code 468 (ACTIVE CURVE SYSTEM)         •  
Vario roof: Model 230, 231           •
Transporter
  Sheet
Major assembly SAE grade 345.0
Model 639.603/703 with code MA0 (E-CELL 60 kW)   •
Model 901, 902, 903, 904 with transmission 716.643   •
Model 414 power steering   •
Commercial vehicles, bus
  Sheet
Major assembly SAE grade 341.0 342.0 345.0 347.0
dumper system, cab tipper system   •      
Truck hydraulic clutch and power shift: Model 374, 375, 933, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 967, 970, 972, 974, 975, 976       •  
Hydraulic system of Nummek trailing axles     •    
Truck hydraulic power shift: All with code GS3 (Hydraulic gearshift), with code IY2 (Hydraulic fluid according to Sheet 345.0), with code GE1 (Automatic gear control (AGS))       •  
O 305 G: Articulation angle control     •    
Steering in model 930.182/183, 932.182/183, 934.182 with CODE ZP0 (Preparation for cold climate package)       •  
Steering in model 932.182/183 with CODE ZP1 (Cold climate package)       •  
Model 932 except code ZPO (Preparation for cold climate package) except code ZP1 (Cold climate package) Model 930, 934 except code ZPO (Preparation for cold climate package)       •  
Auxiliary steering in model 963, 964 with code JA4Y (Trailing axle, 7.5 t, steered, liftable)       •  
Auxiliary steering in model 963, 964 with code JCLV (CTT steering system, auxiliary steering) except code JCLM (CTT steering system, electrohydraulic)       •  
Rear axle 749.113 in model 963, 964 with code JALD (Axle lift for leading axle)         •