Remove/Install Park Pawl Capacitor - AR54.10-P-1126LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205 with transmission 722
Model 205 with transmission 725
Model 213 with transmission 725
Model 253 with transmission 724
Model 253 with transmission 725
Model 293
Shown on model 205
Fig 1: Park Pawl Capacitor Components Location - Model 253 With Transmission 725 (Shown On Model 205)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 2 | Remove floor covering (2) from front passenger footwell. | Model 205 with transmission 722 Model 205, 253 with transmission 725 Model 253 with transmission 724 |
AR68.20-P-2070LW |
| Model 213 with transmission 725 | AR68.20-P-2065LWE | ||
| Model 293 | AR68.80-P-0008EQ | ||
| 3 | Unscrew nuts (3). | ||
| 4 | Remove footrest (4). | ||
| 5 | Disconnect electrical connector (5). | ||
| 6 | Unscrew nut (6) and unhook park pawl condenser (C8) from bracket and remove. | ||
| 7 | Install in the reverse order. |