LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> C300 4Matic, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 290 (Complete Engine - 253 Chassis 1 Of 2) >> Testing & Repair >> Crank Engine With Starter >> Crank Engine With Starter - AR01.10-P-0110MRI

Crank Engine With Starter - AR01.10-P-0110MRI

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Engine 264 in model 205, 253 

with code B01 (48V technology) 

WARNING Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
  Connect/disconnect     
1 Bring transmission into idle position and apply parking brake.    
2 Connect diagnostic unit.    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04B
3 Switch on ignition.    
4 Activate starter with diagnostic device. IMPORTANT To do this, select the manual compression test in the tests menu item.  
5 Disconnect diagnostic unit.    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04B