Information On Avoiding Damage To Flexible Steel Lines - AH00.10-P-0003-01A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model all (4xWD, CAR, Light transporter, smart)
Assembly notes
If the braided stainless steel line is kinked and clamped off, the inner hose may be damaged.
This reduces the service life of the braided stainless steel line.
- Bending the braided stainless steel line when removing/installing is impermissible.
- Clamping the braided stainless steel line off, e.g. during assembly work, is impermissible.
- A minimum bending radius of 50 mm must be maintained.
- Twisting the braided stainless steel line when removing/installing is impermissible.
- Replace damaged braided stainless steel lines.
Twisted braided stainless steel line
Kinked or clamped off braided stainless steel line