Electrical Function Schematic Of Instrument Cluster, Operating Condition Display - PE54.30-P-2055-97FBA
Model 205, 253
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 15G |
| 10 | ECO start/stop function, status | 13D |
| 10 | ECO start/stop function, status | 14F |
| 10 | ECO start/stop function, status | 8F |
| 2 | Wheel speed, signal | 17B |
| 2 | Wheel speed, signal | 15F |
| 3 | Engine speed, signal | 14C |
| 3 | Engine speed, signal | 15F |
| 3 | Engine speed, signal | 9F |
| 4 | Coolant temperature, signal | 14C |
| 4 | Coolant temperature, signal | 15F |
| 4 | Coolant temperature, signal | 9F |
| 5 | Fuel tank fuel level indicator fill level sensor, signal | 6B |
| 6 | Fuel level, signal | 13C |
| 6 | Fuel level, signal | 14G |
| 6 | Fuel level, signal | 10E |
| 7 | Gear stage, signal | 14D |
| 7 | Gear stage, signal | 14F |
| 7 | Gear stage, signal | 11G |
| 8 | Transmission mode, signal | 14D |
| 8 | Transmission mode, signal | 14F |
| 8 | Transmission mode, signal | 11H |
| 9 | ECO start/stop function button, status | 17D |
| 9 | ECO start/stop function button, status | 18J |
| 9 | ECO start/stop function button, status | 12G |
| 9 | ECO start/stop function button, status | 7F |
| A1 | Instrument cluster | 15G |
| A105 | Touchpad | 22G |
| A1e4 | Fuel reserve indicator lamp | 13H |
| A1e54 | Coolant temperature warning lamp | 13H |
| A1p1 | Coolant temperature gauge | 13H |
| A1p13 | Multifunction display | 13G |
| A1p2 | Fuel level indicator | 13J |
| A1p5 | Tachometer | 13J |
| A1p8 | Speedometer | 13J |
| A26/17 | Head unit | 17H |
| A40/9 | Audio/COMAND control panel | 22K |
| B4/1 | Fuel tank fuel level indicator fill level sensor, left | 4B |
| B4/2 | Fuel tank fuel level indicator fill level sensor, right | 4B |
| CAN A | Telematics CAN | 19J |
| CAN C | Engine CAN | 8F |
| CAN C1 | Drivetrain CAN | 9K |
| CAN C1 | Drivetrain CAN | 9B |
| CAN HMI | User interface CAN | 15E |
| CAN HMI | User interface CAN | 17F |
| Code 446 | Touchpad only | 21G |
| Flex E | Chassis FlexRay | 12E |
| Flex E | Chassis FlexRay | 13C |
| Flex E | Chassis FlexRay | 19C |
| N118 | Fuel pump control unit | 7A |
| N127 | Drivetrain control unit | 10F |
| N3/10 | ME-SFI [ME] control unit | 5E |
| N3/9 | CDI control unit | 5G |
| N30/4 | Electronic Stability Program control unit | 22B |
| N73 | Electronic ignition switch control unit | 16B |
| U1056 | Valid except code 446 (Touchpad only) | 21J |
| U2031 | Valid for transmission 724 | 5J |
| U2032 | Valid for transmission 722 | 5K |
| U398 | Valid for transmission 725 (NAG3) | 5J |
| Y3/8n4 | Fully integrated transmission control, control unit | 7K |