Remove/Install HERMES Control Unit - AR82.95-P-0019LWM
Model 205 as of model year 2019 with code 360 (HERMES UMTS)
Model 205 as of model year 2019 with code 362 (HERMES communications module LTE)
Fig 1: HERMES Control Unit Components Location - Model 205 As Of Model Year 2019 With Codes 360 And 362
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Carry out commissioning of HERMES control unit (N112/9). | When replacing the HERMES control unit (N112/9). | |
| AD00.00-P-2000-04B | |||
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Release head unit (A26/17) and pull toward rear. | Model 205 as of model year 2019 with code 360 (HERMES UMTS) with code 506 (Audio 20 NTG 5.5 radio) Model 205 as of model year 2019 with code 360 (HERMES UMTS) with code 531 (COMAND APS) Model 205 as of model year 2019 with code 362 (HERMES communications module LTE) with code 506 (Audio 20 NTG 5.5 radio) Model 205 as of model year 2019 with code 362 (HERMES communications module LTE) with code 531 (COMAND APS) |
AR82.85-P-1101LWM |
| 4 | Disconnect electrical connectors (3, 4) at HERMES control unit (N112/9). | ||
| 5 | Unclip HERMES control unit (N112/9) from holder (2) and remove. | ||
| 6 | Install in the reverse order. |