Read Out Propeller Shaft Inclination Angles From Memory; Correct If Necessary - AR41.10-P-0086-01LW
Model 205, 213, 238, 253
 |
Data Sheet for Measuring Inclination Angle, Form |
|
OF41.10-P-3000-01A |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 205 Except AMG |
Model 205 AMG |
| BE41.10-P-1001-01G |
Front inclination angle of transmission relative to front propeller shaft (∠1) |
∠° |
-0, 50...+0, 67 |
-0, 30...+0, 30 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 213 Except AMG |
Model 213 AMG |
| BE41.10-P-1001-01G |
Front inclination angle of transmission relative to front propeller shaft (∠1) |
∠° |
-0, 50...+0, 67 |
-0, 60...+0, 40 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 238 |
Model 253 |
| BE41.10-P-1001-01G |
Front inclination angle of transmission relative to front propeller shaft (∠1) |
∠° |
-0, 50...+0, 67 |
+1, 00...+3, 00 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 205 Except AMG |
Model 205 AMG |
| BE41.10-P-1002-01G |
Inclination angle of front propeller shaft relative to rear propeller shaft (∠2) |
∠° |
+0, 00...+1, 00 |
+0, 10...+0, 50 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 213 Except AMG |
Model 213 AMG |
| BE41.10-P-1002-01G |
Inclination angle of front propeller shaft relative to rear propeller shaft (∠2) |
∠° |
+0, 00...+1, 00 |
+0, 10...+0, 50 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 238 |
Model 253 |
| BE41.10-P-1002-01G |
Inclination angle of front propeller shaft relative to rear propeller shaft (∠2) |
∠° |
+0, 00...+1, 00 |
-3, 00...-1, 00 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 205 Except AMG |
Model 205 AMG |
| BE41.10-P-1003-01G |
Rear inclination angle of rear propeller shaft relative to rear axle differential (∠3) |
∠° |
-1, 00...-0, 17 |
-0, 90...-0, 50 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 213 Except AMG |
Model 213 AMG |
| BE41.10-P-1003-01G |
Rear inclination angle of rear propeller shaft relative to rear axle differential (∠3) |
∠° |
-1, 00...-0, 17 |
-1, 00...-0, 40 |
CHECK VALUES FOR PROPELLER SHAFT ARTICULATION ANGLE
| Number |
Designation |
Model 238 |
Model 253 |
| BE41.10-P-1003-01G |
Rear inclination angle of rear propeller shaft relative to rear axle differential (∠3) |
∠° |
-1, 00...-0, 17 |
-1, 00...-0, 20 |
The display indicates that the meter is ready to measure angle 5. This angle is no longer measured.
- Press MEMORY button on articulation angle meter once.
The main menu appears.
- Press the MEMORY button again.
The memory displays the measured angles (a, b, d) and the resulting articulation angle ∠1 (c) and articulation angle ∠2 (e).
- Record inclination angle ∠1 (c) e.g. +0.26° and inclination angle ∠2 (e) e.g. +0.58° on the data sheet.
- Press the STEP button.
Memory display message
 Courtesy of MERCEDES-BENZ USA
|
The memory displays the measured angles (d, f) and calculated articulation angle ∠3 (g).
- Record inclination angle ∠3 (g) e.g. -0.08° on the data sheet.
Memory display message
 Courtesy of MERCEDES-BENZ USA
|
- Calculate the inclination angles from the differences between the respective angle measurements.
Inclination angle ∠1: Transmission to front half of propeller shaft.
Inclination angle ∠2: Front half of propeller shaft to rear half of propeller shaft.
Inclination angle ∠3: Rear half of propeller shaft to rear axle differential.
If a value is outside of the tolerance, it must be corrected. All articulation angle differences should be as close as possible to the center of the relevant tolerance range.
A check measurement must be carried out after each inclination angle correction.
 Courtesy of MERCEDES-BENZ USA
|