Remove/Install Front Diagonal Strut - Ar61.10-P-5144LWO

Model 205.4, 238.4

Shown on model 238.4

Fig 1: Front Diagonal Strut Component Location (Model 205.4) (Shown On Model 238.4)

G14172811

Courtesy of MERCEDES-BENZ USA

Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A .
	Notes on safety-relevant components		AH00.00-Z-0019-01A .
	Remove/install
1	Remove left and right front engine compartment linings.	Model 205.4	AR61.20-P-1105LW .
		Model 238.4	AR61.20-P-1105LWE
2	Remove screw/bolts (1, 2).	Do not use an impact wrench. Otherwise the threads can be damaged.
		Bolt, front diagonal strut to front axle carrier/torsion bar bearing shell/radiator mounting console	*BA61.10-P-1006-01L .
3	Unscrew bolts (3) and remove diagonal strut (4).	Do not use an impact wrench. Otherwise the threads can be damaged. Position diagonal strut (4) between struts (5) and integral carrier (6).
		Bolt, front diagonal strut to front axle carrier/torsion bar bearing shell/radiator mounting console	*BA61.10-P-1006-01L .
4	Install in the reverse order.

FRAME FLOOR ASSEMBLY (BA61.10-P-1006-01L) (Model 205, 238)

Number	Designation		Model 205	Model 238
BA61.10-P-1006-01L	Bolt, front diagonal strut to front axle carrier/torsion bar bearing shell/radiator mounting console	Nm	50	50