Align Windshield In Body Opening - AR67.10-P-1000-04G

Model 117, 156, 169, 170, 171, 172.4, 176, 205, 207, 209, 218, 230.4, 231, 242, 245.2, 246, 253, 293 

Model 212 except code Z04 (Light armoring) 

Model 212, 218 

Model 207, 209, 231 

Model 117, 156, 169, 170, 171, 172, 176, 205, 230, 242, 245, 246, 253, 293 

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

1. Place windshield (1) down on windshield rubber spacers on body flange.
2. Center windshield (1) in body opening.
3. Adjust gap dimension (A) with feeler gauge.
4. Glue on strips of adhesive tape (arrows).
5. Cut through adhesive strips (arrows) at top of windshield (1).
6. Remove windshield (1) from vehicle.

Courtesy of MERCEDES-BENZ USA

Shown on model 169.0