Remove/Install Seat Belt End-Fitting Tensioner - AR91.40-P-0632LWE
Model 205.0/2, 213, 253, 293
with code 460 (Canada version)
Model 205.0/2, 213, 253, 293
with code 494 (US version)
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/Install | |||
| 1 | Move front seat forward and all the way upward. | ||
| 2 | Detach ground line of on-board electrical system battery. | Model 293 with code 460 (Canada version) Model 293 with code 494 (US version) |
AR54.10-P-0003EQ |
| Model 205.0/2, 213, 253 with code 460 (Canada version) Model 205.0/2, 213, 253 with code 494 (US version) |
AR54.10-P-0003LW | ||
| 3 | Remove cover (1). | ||
| 4 | Remove seat belt end fitting. | AR91.40-P-1030-02LWE | |
Model 205.0/2, 253, 293 with code 494 (US version) Screw for seat belt end fitting lock washer |
*BA91.40-P-1018-01U | ||
Model 213 with code 494 (US version) Screw, cover for seat belt end-fitting tensioner |
*BA91.40-P-1012-01U | ||
| 5 | Disconnect electrical connection (2). | Fig 2 | |
| 6 | Remove screw (4) and take off seat belt end-fitting tensioner (3). | *BA91.40-P-1013-01U | |
| 7 | Install in the reverse order. | ||
| 8 | Check Supplemental Restraint System (SRS) using vehicle diagnosis system. | ||
| Model 293 with code 460 (Canada version) Model 293 with code 494 (US version) |
AD00.00-P-2000-06FR | ||
| Model 205.0/2, 213, 253 with code 460 (Canada version) Model 205.0/2, 213, 253 with code 494 (US version) |
AD00.00-P-2000-04B |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 213 | |
|---|---|---|---|
| BA91.40-P-1012-01U | Screw, cover for seat belt end-fitting tensioner | Nm | 4 |
PILL SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 205.0 | Model 205.2 | |
|---|---|---|---|---|
| BA91.40-P-1013-01U | Bolt, seat belt end-fitting tensioner | Nm | 45 | 45 |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 213 | Model 253 | |
|---|---|---|---|---|
| BA91.40-P-1013-01U | Bolt, seat belt end-fitting tensioner | Nm | 35 | 45 |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 293 | |
|---|---|---|---|
| BA91.40-P-1013-01U | Bolt, seat belt end-fitting tensioner | Nm | 45 |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 205.0 | Model 205.2 | |
|---|---|---|---|---|
| BA91.40-P-1018-01U | Screw for seat belt end fitting lock washer | Nm | 4 | 4 |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 253 | Model 293 | |
|---|---|---|---|---|
| BA91.40-P-1018-01U | Screw for seat belt end fitting lock washer | Nm | 4 | 4 |