Remove/Install Front Seat Backrest Cover - AR91.18-P-1820NKC
Model 117, 156, 176, 190, 205.0/2, 253
with code 555 (AMG-Performance Seat)
Shown on seat with code 873 (Seat Heater For Driver And Front Passenger)
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/Install | |||
| 1 | Remove front seat. | Model 190 with code 555 (AMG-Performance Seat) |
AR91.10-P-1000RG |
| Model 205.0/2, 253 with code 555 (AMG-Performance Seat) |
AR91.10-P-1000LW | ||
| Model 117, 156, 176 with code 555 (AMG-Performance Seat) |
AR91.10-P-1000NKA | ||
| 2 | Remove trims (5, 6) from front seat frame. | Model 117, 176 with code 555 (AMG-Performance Seat) Model 156 with code 555 (AMG-Performance Seat) except code 842 (Folding front passenger seat) |
AR91.10-P-1201NKB |
| Model 190 with code 555 (AMG-Performance Seat) | AR91.10-P-1201RG | ||
| Model 205.0/2, 253 with code 555 (AMG-Performance Seat) with code U22 (Lumbar Support Adjustment) | AR91.10-P-1201LWA | ||
| 3 | On trim (2), unclip guide lugs (8) backward (arrow A), unclip guide lugs (9) to side (arrow B) and remove trim (2). | Mounting wedge |
Fig 2 |
| 4 | On trim (3), unclip guide lugs (8) backward (arrow A), unclip guide lugs (9) to side (arrow B) and remove trim (3). | Mounting wedge |
Fig 2 |
| 5 | Unscrew screws (10) and remove cover (4) from front seat side bag unit. | Model 190 with code 555 (AMG-Performance Seat) Bolt, cover for side bag to backrest frame |
*BA91.10-P-1010-01R |
Model 117, 156, 176, 205.0/2, 253 with code 555 (AMG-Performance Seat) Bolt, cover for side bag to backrest frame |
*BA91.10-P-1002-02A | ||
| 6 | Unclip retaining clips (14) and loosen check straps (11) on back shell (13). | ||
| 7 | Remove seat cover (7) from bottom of back shell (13) and fold over (arrow C) | Dismantling tool |
Fig 3 |
| 8 | Loosen seat cover (7) all-round from seat backrest (arrows D) and fold over. | Mounting wedge |
Fig 2 |
| 9 | Loosen padding (16) all-round from seat backrest. | Attach padding (16) to seat backrest all-round with standard upholstery adhesive. Dismantling tool |
Fig 3 |
| 10 | Press seat cover (7) inward slightly until staple profile is detached from cover (1) and unhook seat cover (7) from cover (1). | Correct seating of the staple profile must be ensured. |
|
| 11 | Release and disconnect electrical connector (15). | Model 117, 156, 176, 190, 205.0/2, 253 with code 555 (AMG-Performance Seat) with code 873 (Left And Right Driver's Seat Heating) | |
| 12 | Remove padding (16) with seat cover (7). | ||
| 13 | Fold over seat cover (7) at padding (16) and disconnect staple hooks (17). | ||
| 14 | Remove seat cover (7) from padding (16). | ||
| 15 | Modify AMG badge (19). | When replacing the seat cover (7). | |
| 16 | Install in the reverse order |
SEATS
| Number | Designation | Model 117, 156, 176 with code 555 (AMG-Performance Seat) | Model 205 with code 555 (AMG-Performance Seat) | |
|---|---|---|---|---|
| BA91.10-P-1002-02A | Bolt, cover for side bag to backrest frame | Nm | 2 | 2 |
SEATS
| Number | Designation | Model 253 with code 555 (AMG-Performance Seat) | |
|---|---|---|---|
| BA91.10-P-1002-02A | Bolt, cover for side bag to backrest frame | Nm | 2 |
FRONT SEATS
| Number | Designation | Model 190 | |
|---|---|---|---|
| BA91.10-P-1010-01R | Bolt, cover for side bag to backrest frame | Nm | 3, 5 |