Notes On Programming Garage Door Opener Transmitter Unit - AH68.05-P-0002-01A

Model all 

with code 231 (Garage door opener) 

Model all 

with code 232 (Garage door opener) 

Details on programming garage door opener transmitter unit as well as the applicable alternatives should be observed in accordance with the addition instructions and information on the appropriate manufacturer website.

Programming the national version, learning in hand transmitter and synchronization of alternating code system is described in the Mercedes-Benz operating instructions

Compatibility of garage door drive to garage door opener 

If the garage door drive is not compatible with the garage door opener, a universal receiver (Fix Kit receiver) can be installed in the garage for modulating the radio signal.

Additional information on universal receivers is available at the appropriate manufacturer website.

Misuse protection 

As of model series 204 the garage door opener transmitter unit with misuse protection is installed. It is necessary to perform an initial startup procedure for this garage door opener transmitter unit when replacing using a diagnostic system. The safety code is initialized and the national version programmed.