Remove/Install Accelerator Pedal - AR30.12-P-1321LF

Model 205 

Model 217 

Model 222 

Model 253 

Model 293 

Shown on model 222 

Courtesy of MERCEDES-BENZ USA

Shown on model 205 with code ME05 (Hybrid Drive 80kW-Variant (Including Plug-In)) 

Fig 1: Accelerator Pedal Components Location - Model 205 (Shown With Code ME05)

Courtesy of MERCEDES-BENZ USA

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/Install
1	Switch off ignition.
2	Unscrew nuts (1), remove accelerator pedal (2) and place to one side.	Installation:  Ensure that the wiring harness is not pinched. Otherwise malfunctions of the accelerator pedal (2) can occur.
		Nut, accelerator pedal to firewall	*BA30.20-P-1001-03B
3	Disconnect electrical connector (3).
4	Disconnect electrical connection (4).	Model 205, 222, 253 with code ME05 (Hybrid Drive 80kW-Variant (Including Plug-In))   Model 293
5	Remove accelerator pedal (2).	The accelerator pedal (2) must not be disassembled. It can be damaged and must be replaced otherwise.
6	Install in the reverse order