Remove/Install Sensors For Blind Spot Assist - AR54.71-P-0100LW
Model 205
up to model year 2019
with code 234 (Blind Spot Monitoring)
Model 205
up to model year 2019
with code 237 (Active Blind Spot Assist)
Fig 1: Sensors For Blind Spot Assist Components Location - Model 205 Up To Model Year 2019 With Codes 234 And 237; Shown On Model 205.0
Shown on model 205.0
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on preventing damage to electronic components due to a magnetic tool | AH54.00-P-0002-01A | ||
| Remove/install | |||
| 1 | Remove rear bumper (1). | Model 205.2 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.2 up to model year 2019 with code 237 (Active Blind Spot Assist) |
AR88.20-P-2200LWS |
| Model 205.0/1/3/4 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.0/1/3/4 up to model year 2019 with code 237 (Active Blind Spot Assist) |
AR88.20-P-2200LW | ||
| 2 | Disconnect electrical connector (2) from radar sensors (B92/6, B92/7, B92/10 or B92/11). | ||
| 3.1 | Remove mounting bracket (3) and remove radar sensors (B92/6, B92/7, B92/10 or B92/11). | Model 205.0/1/2 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.0/1/2 up to model year 2019 with code 237 (Active Blind Spot Assist) |
|
| 3.2 | Release and remove radar sensors (B92/6, B92/7, B92/10 or B92/11) from rear bumper (1). | Model 205.3/4 up to model year 2019 with code 234 (Blind Spot Monitoring) Model 205.3/4 up to model year 2019 with code 237 (Active Blind Spot Assist) |
|
| 4 | Install in the reverse order. |