(Function Schematic For Actuating Blower Motor - PE83.10-P-2502-97B)
Model 167
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Operation, signal | 23C |
| 1 | Operation, signal | 15C |
| 1 | Operation, signal | 23A |
| 10 | Blower motor, actuation | 35E |
| 2 | Evaporator drying, request | 23D |
| 2 | Evaporator drying, request | 15D |
| 3 | Engine running, signal | 8E |
| 3 | Engine running, signal | 15E |
| 3 | Engine running, signal | 22C |
| 4 | Circuit 15, status | 22D |
| 5 | Dew point temperature, signal | 8G |
| 5 | Dew point temperature, signal | 23G |
| 6 | Solar radiation, signal | 7G |
| 6 | Solar radiation, signal | 23J |
| 7 | Interior temperature sensor, signal | 23J |
| 8 | Crash, signal | 23K |
| 9 | Blower motor, request | 31E |
| A26/17 | Head unit | 1C |
| A32 | AC housing | 32E |
| A32m1 | Electronic blower motor | 36E |
| B10/4 | Interior temperature sensor | 2J |
| B38/2 | Rain/light sensor with additional functions | 1H |
| CAN B | Interior CAN | 22D |
| CAN B | Interior CAN | 22H |
| CAN B | Interior CAN | 14H |
| CAN HMI | User interface CAN | 14C |
| CAN HMI | User interface CAN | 14E |
| CAN HMI | User interface CAN | 7E |
| CAN HMI | User interface CAN | 7C |
| Flex E | Chassis FlexRay | 7F |
| Flex E | Chassis FlexRay | 14F |
| LIN B8-2 | Climate control LIN 2 | 30E |
| LIN B8-3 | AC operation LIN | 22A |
| LIN B8-3 | AC operation LIN | 7A |
| LIN B8-3 | AC operation LIN | 14A |
| N10/6 | Front SAM control unit | 9H |
| N127 | Drivetrain control unit | 9F |
| N133/1 | Instrument cluster control unit | 2E |
| N2/10 | Supplemental restraint system control unit | 1K |
| N22/1 | Climate control, control unit | 24E |
| N22/4 | Rear air conditioning operating unit | 2B |
| N3/10 | ME-SFI [ME] control unit | 2F |
| N3/9 | CDI control unit | 1F |
| N58/1 | Climate control operating unit | 1A |
| N73 | Electronic ignition switch control unit | 16D |