124 586 04 33 00 Puller - WS35.00-P-0600B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 156, 176, 177, 204, 212, 246, 247
Model 206, 254
with code 700 (Vehicle production location China)
Use in FG 35/Set B
Purpose:
Puller for pulling drive flange at rear axle differential.
Technical Note:
Puller, 3-arm, span 250 mm, throat depth 200 mm.
NOTE:
Replacement for W 124 589 04 33 00 Puller.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.
The manufacturer of this article is the company Kleinbongartz & Kaiser OHG, Heinrich-Hertz-Str. 5, 40721 Hilden, Germany.