LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> A220 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Rear Axle -- 118 Chassis) >> Capacities & Specifications >> Rear Axle Shaft - BF35.30-P-1000-01G

Rear Axle Shaft - BF35.30-P-1000-01G

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 156, 166, 170, 171, 172, 176, 177, 190, 204, 205, 206, 207, 208, 209, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 236, 238, 242, 246, 247, 253, 257, 290, 292 

Plugged in shafts 

MODIFICATION NOTES

13.10.2022 Value changed: Filling capacity for joint housing Model 223 Plugged in shafts  
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 118 Plugged in shafts Model 156 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 166, 170, 171, 172, 190, 204, 207, 208, 209, 211, 212, 215, 216, 218, 219, 220, 221, 230, 246, 292 Plugged in shafts Model 176 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 177 Plugged in shafts Model 205 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 206, 214, 236 Model 213 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 210 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 217 Plugged in shafts Model 222 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 223 Plugged in shafts Model 231 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 210 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 238 Plugged in shafts Model 242 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 247 Plugged in shafts Model 253 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
REAR AXLE SHAFT, PLUGGED IN SHAFTS

Number Designation Model 257 plugged-in shafts Model 290 Plugged in shafts
BF35.30-P-1001-01G Filling capacity for joint housing Ø 82 g 80 80
Ø 95 g 100 100
Ø 102 Outer joint (wheel side) g 120 120
Inner joint (axle drive module) g 120 120
Ø 106 g 130 130
Ø 112 g 140 140
Ø 116 g 150 150
scientia non olet · About LEMON Manuals