Injection Nozzles, Injection Valves, Lines - BA07.03-P-1000-01I
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 260, 264
INJECTION NOZZLES, INJECTION VALVES, LINES
| Number | Designation | Engine 260 | Engine 264 | ||
|---|---|---|---|---|---|
| BA07.03-P-1001-01I | Union nut, fuel line to high-pressure pump/fuel distributor | Stage 1 | Nm | 15 | 15 |
| Stage 2 | ∠° | 75 | 75 | ||
| Stage 3 | ∠° | 25 | 25 | ||
| BA07.03-P-1002-01I | Screw, low-pressure line holder to cylinder head/crankcase/holder | Nm | - | 8 | |
| BA07.03-P-1003-01I | Cap on service connection | Nm | - | 1 | |
| BA07.03-P-1004-01I | Union nut, fuel hose to low-pressure line | Nm | - | 24 | |
| BA07.03-P-1005-01I | Screw, purge valve holder to crankcase | Nm | - | 8 | |