Injection Nozzles, Injection Valves, Lines - BA07.03-P-1000-01F
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133.980, 139, 270, 274
MODIFICATION NOTES
| 23.08.2021 | Value changed: Union nut, fuel line to fuel distributor | Engine 139 | |
| 23.08.2021 | Value changed: Union nut, fuel line to high-pressure pump | Engine 139 |
INJECTION NOZZLES, INJECTION VALVES, LINES
| Number | Designation | Engine 133.980 | Engine 139 | |||
|---|---|---|---|---|---|---|
| BA07.03-P-1001-01F | Union nut, fuel line to fuel distributor | In case of reusability | Nm | - | 22 | |
| For new lines | Stage 1 | Nm | 15 | 15 | ||
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | - | - | |||
| BA07.03-P-1002-01F | Union nut, fuel line to high-pressure pump | In case of reusability | Nm | - | 22 | |
| For new lines | Stage 1 | Nm | 15 | 15 | ||
| Stage 2 | ∠° | 90 | 90 | |||
| Stage 3 | ∠° | - | - | |||
| BA07.03-P-1003-01F | Dust cap at service connection | Plastic | Nm | - | - | |
| Metal | Nm | - | - | |||
| BA07.03-P-1004-01F | Screw, bracket clamp for low-pressure line/high-pressure line | Nm | 8 | |||
| BA07.03-P-1005-01F | Union nut, fuel hose to fuel line | Nm | - | 24 | ||
| BA07.03-P-1006-01F | Bolt, low-pressure line to bracket | Nm | - | 8 | ||
| BA07.03-P-1007-01F | Screw, low-pressure line holder to charge-air distributor/oil cooler holder | Nm | - | 8 | ||
INJECTION NOZZLES, INJECTION VALVES, LINES
| Number | Designation | Engine 270 | Engine 274 | |||
|---|---|---|---|---|---|---|
| BA07.03-P-1001-01F | Union nut, fuel line to fuel distributor | In case of reusability | Nm | - | - | |
| For new lines | Stage 1 | Nm | 15 | 15 | ||
| Stage 2 | ∠° | 75 | 75 | |||
| Stage 3 | ∠° | 25 | 25 | |||
| BA07.03-P-1002-01F | Union nut, fuel line to high-pressure pump | In case of reusability | Nm | - | - | |
| For new lines | Stage 1 | Nm | 15 | 15 | ||
| Stage 2 | ∠° | 75 | 75 | |||
| Stage 3 | ∠° | 25 | 25 | |||
| BA07.03-P-1003-01F | Dust cap at service connection | Plastic | Nm | - | 2 | |
| Metal | Nm | - | 15 | |||
| BA07.03-P-1004-01F | Screw, bracket clamp for low-pressure line/high-pressure line | Nm | - | - | ||
| BA07.03-P-1005-01F | Union nut, fuel hose to fuel line | Nm | - | - | ||
| BA07.03-P-1006-01F | Bolt, low-pressure line to bracket | Nm | - | - | ||
| BA07.03-P-1007-01F | Screw, low-pressure line holder to charge-air distributor/oil cooler holder | Nm | - | - | ||