Test And Adjustment Values: Passenger Cars: Mixture Formation - BE07.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All
| Exhaust emissions inspection specifications - Spark-ignition engine | ENGINE 178, 274, 276... | BE07.00-P-0001-00D | |
| Emissions inspection specified values - Diesel engine | Engine 642 Engine 654 Engine 656 | BE07.00-P-1000-01A | |
| Emissions inspection specified values - Spark-ignition engine | Engine 176, 177, 178, 256, 264, 270, 274, 276 Engine 279 | BE07.00-P-1000-02A | |
| Diesel fuel pump | ENGINE 601, 603, 604, 605 | BE07.02-P-1000-01A | |
| Check values for fuel high-pressure pump | Engine 254, 256 | BE07.02-P-1000-03MRT | |
| Injection nozzles | ENGINE 604.910, 605.910, 606.964 | BE07.03-P-1000-01A | |
| Specifications of gear capacity of inline injection pump with mechanical control (M/RSF) | ENGINE 601, 603... | BE07.11-P-3000-01A | |
| IFI injection pump | ENGINE 601, 603.971, 605, 606 | BE07.12-P-1000-01A | |
| Specified values of gear capacity in-line injection pump with electronic control (IFI, EDC) | ENGINE 602, 605, 606... | BE07.12-P-3000-01A | |
| Start of delivery of DFI injection pump | ENGINE 604.910 | BE07.13-P-1000-02A | |
| Specifications of gear output distributor pump (DFI, EDC) | ENGINE 602, 604... | BE07.13-P-3000-01A | |
| Injector | ENGINE 651 | BE07.16-P-1000-01A | |
| Specified values for wheel performance for common rail diesel injection (CDI) | ENGINE 611, 612, 613, 628, 668... | BE07.16-P-3000-01A | |
| EI specified values 2E-E carburetor | ENGINE 102... | BE07.20-P-2000-01A | |
| Electronic CFI fuel injection system | ENGINE 103.985 | BE07.32-P-1000-01A | |
| Fuel pressures (CSI) | ENGINE 103.984, 104.981, 119.960 | BE07.32-P-1000-03A | |
| Injection valves (CSI) | ENGINE 103.984, 104.981, 119.960 | BE07.32-P-1000-04A | |
| EI specified values K-jetronic | ENGINE 102.910/96/98/99 with CODE (620a) Vehicles with catalytic converters | BE07.32-P-2000-01A | |
| EI specified values K-jetronic | ENGINE 103, 104... | BE07.32-P-2000-01B | |
| Emissions inspection specified values, KE-Jetronic | ENGINE 116.964/965, 117.964/965/968, 119.960 with CODE (620) Vehicles with catalytic converters | BE07.32-P-2000-01C | |
| Specifications of gear capacity CFI fuel injection system | ENGINE 104, 119... | BE07.32-P-3000-01A | |
| Engine speeds (LH-SFI) | ENGINE 104, 119, 120 LH without CAT | BE07.41-P-1000-01A | |
| Emission control system (LH-SFI) | ENGINE 104, 119, 120 LH without CAT | BE07.41-P-1000-02A | |
| Fuel pressures (LH-SFI) | ENGINE 104, 119, 120 | BE07.41-P-1000-04A | |
| Injection valves (LH-SFI) | ENGINE 104.990, 119.970/971/972, 120.980/981 | BE07.41-P-1000-05A | |
| Specifications of gear capacity LH-SFI fuel injection system | ENGINE 104, 119, 120... | BE07.41-P-3000-01A | |
| Injection valves (HFM-SFI) | ENGINE 104.941/943/944/991/994, 111.920/941/961 | BE07.51-P-1000-02A | |
| Engine speeds (HFM-SFI/MFI) | ENGINE 104, 111 | BE07.51-P-1000-04A | |
| Fuel pressures (HFM sequential multiport fuel injection/ignition system) | ENGINE 104, 111 | BE07.51-P-1000-05A | |
| Emission control system (HFM-SFI) | ENGINE 104, 111 | BE07.51-P-1000-06A | |
| Specifications for gear output of HFM fuel injection and ignition system | ENGINE 104... | BE07.51-P-3000-01A | |
| Specifications for gear output of HFM fuel injection and ignition system | ENGINE 111... | BE07.51-P-3000-01B | |
| Injection valves (PEC) | ENGINE 111 | BE07.52-P-1000-02A | |
| Emission control system (PEC) | ENGINE 111 | BE07.52-P-1000-03A | |
| Specified values of gear capacity PEC fuel injection and ignition system | ENGINE 111... | BE07.52-P-3000-01A | |
| Engine speeds (ECM) | ENGINE 166 | BE07.53-P-1000-01A | |
| Emission control (ECM) | ENGINE 166 | BE07.53-P-1000-02A | |
| Specifications of gear capacity ECM fuel injection and ignition system | ENGINE 166... | BE07.53-P-3000-01A | |
| Test values for engine speeds (ME-SFI) | ENGINE 104, 111, 112, 113, 119, 120, 137 | BE07.61-P-1000-02A | |
| Test values for emissions control (ME-SFI) | ENGINE 104, 111, 112, 113, 119, 120, 137 | BE07.61-P-1000-03A | |
| Test values for ignition angle (ME-SFI) | ENGINE 120 | BE07.61-P-1000-04A | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 104... | BE07.61-P-3000-01A | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 111... | BE07.61-P-3000-01B | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 111... | BE07.61-P-3000-01BB | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 112... | BE07.61-P-3000-01C | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 113... | BE07.61-P-3000-01D | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 119... | BE07.61-P-3000-01E | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 120... | BE07.61-P-3000-01F | |
| Specifications of gear capacity ME-SFI fuel injection and ignition system | ENGINE 137.970 in MODEL 215.378, 220.178/878 with TRANSMISSION 722.628 | BE07.61-P-3000-01G |