000 588 04 71 00 Pump - WS47.00-P-0080B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Engine All (4xWD, CAR, Heavy transporter, Light transporter, smart)

Use in FG 47/set B

Purpose:

Transfer feed pump for transferring spark-ignition engine fuel and diesel fuel during repair and service operations.

Procurement information:

This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Each of the devices listed below is delivered with a set of extraction probes. This consists at least of a standard extraction probe (outside diameter 12 mm) and an emergency extraction probe (outside diameter 6 mm).

Manufacturer 1

GL-GmbH Werkstatttechnik

Nurtinger Strasse 23-25

72636 Frickenhausen, Germany

Germany

https://gl-gmbh.de

Model: Tankprimus 100 (110 liters)
Article no.: 400 100
Model: Tankprimus 80 (88 liters)
Article no.: 400 080

Manufacturer 2

Plank GmbH

Von-Gumppenberg-Str. 4

86554 Poettmes

Germany

http://www.plankgmbh.de

Model: SORB-AS 2.0 (120 liters)
Article no.: 170020-MB
Model: SORB-AS 2.0 (200 liters)
Article no.: 170021-MB