000 588 35 80 00 Holding Device - WS72.00-P-0040B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All (4xWD, CAR, Heavy transporter, Light transporter)
Use in FG 72/set B
Purpose:
Holding device for installing and removing doors.
Technical Note:
The maximum load capacity of the holding device is 300 kg.
NOTE:
Please observe the manufacturer specific accessories.
Procurement information:
This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer
CON4TOOLS GmbH
Turnstrasse 11
42289 Wuppertal
Germany
http://www.con4tools.de
- Type/model: Multi-functional holding device for doors
Article number: EFA06-heavy-duty