Pneumatic Brake Booster Test Specifications - BE43.10-P-1000-01J
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 118.### 1# with engine 139/260 model 118.### 1# with engine 282/608/654 with code 950/U29 | Model 118.### 1# with engine 282/608/654 except code 950/U29 | ||||
|---|---|---|---|---|---|---|---|
| BE43.10-P-1001-01J | Brake booster Ø | Inch | 11 | 10 | |||
| BE43.10-P-1002-01J | Boost factor | 7, 5 | 7 | ||||
| BE43.10-P-1003-01J | Master brake cylinder Ø | mm | 25, 4 | 23, 81 | |||
| BE43.10-P-1004-01J | Brake line pressure | Vacuum 0.92...0.98 bar | Force on brake pedal (force on input rod where pedal i = 3.3) | 165 N | bar | 21 | 18 |
| 300 N | bar | 44 | 43 | ||||
| 495 N | bar | 68 | 67 | ||||
| 660 N | bar | 91 | 92 | ||||
| 825 N | bar | 113 | 111 | ||||
| BE43.10-P-1005-01J | Line pressure without vacuum | Force on brake pedal (force to input rod for pedal -i = 3.3) | 165 N | bar | 0 | 0 | |
| 330 N | bar | 1, 1 | 1, 3 | ||||
| 495 N | bar | 1, 1 | 4, 5 | ||||
| 660 N | bar | 6, 9 | 7, 7 | ||||
| 825 N | bar | 9, 9 | 11 | ||||
| 1650 N | bar | 26 | 29 | ||||
| BE43.10-P-1006-01J | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | 0, 75...0, 8 | 0, 75...0, 8 | ||
| Test period | s | 30 | 30 | ||||
| Permissible pressure loss | bar | ≤0, 2 | ≤0, 2 | ||||
CHECK VALUES FOR PNEUMATIC BRAKE BOOSTER
| Number | Designation | Model 118.### 2# | ||||
|---|---|---|---|---|---|---|
| BE43.10-P-1001-01J | Brake booster Ø | Inch | 8+8 | |||
| BE43.10-P-1002-01J | Boost factor | 7, 5 | ||||
| BE43.10-P-1003-01J | Master brake cylinder Ø | mm | 25, 4 | |||
| BE43.10-P-1004-01J | Brake line pressure | Vacuum 0.92...0.98 bar | Force on brake pedal (force on input rod where pedal i = 3.3) | 165 N | bar | 21 |
| 300 N | bar | 44 | ||||
| 495 N | bar | 68 | ||||
| 660 N | bar | 91 | ||||
| 825 N | bar | 113 | ||||
| BE43.10-P-1005-01J | Line pressure without vacuum | Force on brake pedal (force to input rod for pedal -i = 3.3) | 165 N | bar | 0 | |
| 330 N | bar | 0, 6 | ||||
| 495 N | bar | 3, 4 | ||||
| 660 N | bar | 6, 4 | ||||
| 825 N | bar | 9, 4 | ||||
| 1650 N | bar | 25 | ||||
| BE43.10-P-1006-01J | Check valve/pressure in vacuum system of brake booster | Test pressure (vacuum) | bar | 0, 75...0, 8 | ||
| Test period | s | 30 | ||||
| Permissible pressure loss | bar | ≤0, 2 | ||||