139 589 00 33 00 Puller - WS05.00-P-0303B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Engine 139

Use in FG 01/05/Set B

Purpose:

Puller for detaching bearing bolt at intermediate gear.

Procurement information:

This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.

Courtesy of MERCEDES-BENZ USA