Notes On Programming Control Units - AH54.21-P-0001-03Z
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 129, 156, 163, 164, 166, 167, 168, 169, 170, 171, 176, 177, 190, 192, 199, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 232, 238, 240, 242, 243, 245 (except 245.286), 246, 247, 251, 253, 254, 257, 290, 292, 293, 294, 295, 296, 297, 415, 420, 447, 448, 461, 463, 464, 470, 471 Model 907, 910
Program using diagnostic system or XENTRY Kit (XENTRY Flash)
The term "XENTRY Flash" is used to designate the Mercedes-Benz AG standard for programming control units.
A differentiation is made here between the following types of programming:
- Online programming
- Program using flash support file (support through User Help Desk)
Further explanation of terms:
- Flashing: Programming of control units.
- Software: Control unit software.
- Flash support file: Contains the relevant data for determination of the control unit software by the diagnostic system User Help Desk.
Program using flash support file (support through User Help Desk)
- The flash support file contains the solution of a concrete query for control unit programming.
- The flash support file must first be sent by the workshop to the diagnostic system User Help Desk (query data). The diagnostic system User Help Desk compiles the reply data as a flash support file and returns the data electronically to the workshop.
- Documentation in the vehicle documentation system (VeDoc) takes place automatically after control unit programming.