711 589 00 34 00 Thrust Piece Set - WS26.00-P-0107C
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 711.6
Transmission 716.7 in model 205, 253
Transmission 722.9 in model 204, 205, 207, 212, 216, 217, 218, 221, 222
Transmission 724.0 in model 118, 177, 247
Transmission 724.2 in model 253
Transmission 725.0 in model 205, 207, 212, 213, 217, 218, 222, 223, 238, 253, 257, 290
Transmission 725.1 in model 206, 214, 254, 257
Use in FG 26/33/Set C
Purpose:
Set of thrust pieces for disassembling power output shafts and grooved ball bearing of intermediate shaft.
Technical note:
In combination with W 000 589 65 33 00 Puller and W 124 589 04 33 00 Puller or W 001 589 47 33 00 Puller.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.