124 586 04 33 00 Puller - WS26.00-P-0421B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 711.6, 716.7, 717.45/46, 722.96, 724.0
Use in FG 26/27/Set C
Purpose:
Puller for bushing of reverse idler gear of main shaft (transmission 717.45/46 ) or for pulling off synchronizer body of output shaft (transmission 711.640/641 ).
Transmission 724.0
Puller for disassembling the power output shaft.
Transmission 716.7
Puller for detaching the power output flange.
Technical Note:
Puller, 3-arm, span 250 mm, throat depth 200 mm.
NOTE:
Replacement for W 124 589 04 33 00 Puller.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.
The manufacturer of this article is the company Kleinbongartz & Kaiser OHG, Heinrich-Hertz-Str. 5, 40721 Hilden, Germany.