116 589 12 33 00 Pulling Arms - WS26.00-P-0017C
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 711.6 in model 204
Transmission 716.6, 717.40/42/45/46, 724.0
Transmission 722.9 in model 204, 205, 207, 212, 216, 217, 218, 221, 222
Transmission 724.2 in model 253
Transmission 725.0 in model 205, 207, 212, 213, 217, 218, 222, 223, 238, 253, 257, 290
Transmission 725.1 in model 206, 214, 254, 257
Use in FG 26/27/33/Set C
Purpose:
Puller arms (2 pieces) for pulling off the reverse idler gear and deep-groove ball bearing on intermediate shaft.
Transmission 724.0/2:
Puller arms for disassembling drive shaft.
Technical Note:
In combination with W 000 589 88 33 00 puller, two-arm.
Procurement information:
Sale of this workshop equipment has been discontinued.
Replaced by W 116 586 12 33 00 Puller arm.