000 588 34 19 00 Adapter Set - WS26.00-P-0417B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission All (4xWD, CAR, Heavy transporter, Light transporter)
Use in FG 26/27/28/41/Set B
Purpose:
Standard adapter set for adapting the inclinometer articulation angle.
Test equipment category CAT_A.
Technical Note:
In combination with W 000 588 33 19 00 Inclinometer.
| 000 588 34 19 01 Adapter | WS26.00-P-0417-01B | ||
| 000 588 34 19 02 Adapter | WS26.00-P-0417-02B | ||
| 000 588 34 19 03 Adapter | WS26.00-P-0417-03B | ||
| 000 588 34 19 04 Adapter | WS26.00-P-0417-04B | ||
| 000 588 34 19 05 Adapter | WS26.00-P-0417-05B |
Procurement information:
This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
Manufacturer
ROMESS Rogg Apparate + Electronic GmbH & Co. KG
Dickenhardtstrasse 67
78054 VS- Schwenningen
Germany
http://www.romess.de
- Standard adapter set Article no.: 09935-25
Consisting of:
- Type/model: Sensor attachment for adaptation Article no.: 09935-20
- Type/model: Transmission adaptation ø 10 mm Article no.: 09935-21
- Type/model: Transmission adaptation ø 15 mm Article no.: 09935-22
- Type/model: Transmission adaptation ø 16 mm Article no.: 09935-23
- Type/model: Adaptation for universal rear axle differential Article no.: 09935-24
NOTE:
A large set of adapters (consisting of W 000 588 34 19 00 and W 000 588 11 19 00) is available for ordering under article no.: 20036-22 DC from the manufacturer.