Remove/Install Lock For Rear Folding Backrest - AR91.12-P-1736MFB
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118.3, 177.1
with code 287 (Through-loading feature)
Shown on model 118.3 with code 287 (Folding seat backrests in rear passenger compartment)
| Remove/install | |||
| 1 | Remove rear shelf. | AR68.30-P-4581MFV | |
| 2 | Remove damping under rear shelf. | ||
| 3 | Release retaining clips (4) and remove from rear panel. | ||
| 4 | Push catch hooks (1) toward inside through large openings (arrows) and remove release handle (3). | ||
| 5 | Unhook cable (2) from release handle (3). | ||
| 6 | Release and disconnect electrical connector (5). | ||
| 7 | Remove bolts_(7). | *BA91.12-P-1003-03N | |
| 8 | Remove seat backrest lock (6) with cable (2). | ||
| 9 | Install in the reverse order. |
REAR SEATS
| Number | Designation | Model 118 | Model 177 | ||
|---|---|---|---|---|---|
| BA91.12-P-1003-03N | Bolt, lock for seat backrest to body | M8 | Nm | 25 | 25 |