Remove/Install Driver Airbag On Steering Wheel - AR91.60-P-0663MFD
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 243
as of model year 2023
Model 177, 247
as of model year 2022
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Move steering wheel (2) all the way upward. | ||
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 3 | Disconnect ground line of battery of 12 V on-board electrical system. | AR54.10-P-0003MFA | |
| 4 | Insert extraction hook (3) into release opening (6) on steering wheel (2) (arrow A). | Fig 2 | |
| 5 | Release safety spring (4) of driver's airbag (1) using extraction hook (3) (arrow B) and lift off steering wheel (2). | ||
| 6 | Remove driver's airbag (1) then release and disconnect electrical connector (5). | This will result in damage to the electric lines and can impair their function. |
|
| 7 | Install in the reverse order. | ||
| 8 | Check Supplemental Restraint System (SRS) with diagnostic device. | When replacing driver's airbag (1). | |
| AD00.00-P-2000-06MFA |