LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> A220 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Seats, Bunks, Restraint Systems (2 Of 2) -- 118 Chassis) >> Forms >> Customer Declaration, Replacement Of Front Passenger Seat, Deactivation Of Automatic Child Seat Recognition, SBE (Seat Occupied Recognition), Side Airbag, Seatbelt Warning Buzzer, Certification - OF91.00-P-1000-03AA

Customer Declaration, Replacement Of Front Passenger Seat, Deactivation Of Automatic Child Seat Recognition, SBE (Seat Occupied Recognition), Side Airbag, Seatbelt Warning Buzzer, Certification - OF91.00-P-1000-03AA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All 

Due to an express customer request as of..... the function of the Side Airbag, automatic child seat recognition (ACSR [AKSE]) and the seat occupied recognition (SBE) and the acoustic reminder to wear seat belts on the passenger-side have been deactivated. There is an increased risk of injury for occupants due to this measure. There may, in particular, be

as a consequence. Due to the lack of an acoustic reminder to wear seat belts there is the risk that the front passenger may forget to wear the seat belt.

This is expressly pointed out to the customer who undertakes likewise to inform other users of the vehicle. The sign "Warning! This vehicle does not have automatic child seat recognition!" was mounted to the right-hand side of the armatures.

(Copy sheet, cut off here and stick the upper section into the operator's manual at the start of the chapter on SAFETY)

Exclusion of liability, exemption and measures 

  1. 1st I hereby renounce all claims against Daimler AG, its associated subsidiaries and its sales partners, which arise - directly or indirectly - as a result of the modifications listed above and the associated increased risk of injury.
  2. I hereby release Daimler AG from all third-party claims and indemnification as stated under (1).
  3. Furthermore, I hereby commit myself to:
    1. To ensure that
      • the above-separated specification is always kept with the operator's manual and
      • the vehicle user/purchaser is notified about this and
    2. Any changes are immediately registered in the vehicle documents; and
    3. To inform the user/purchaser of the vehicle about the modification and the increased risk of injury associated with that.

_________

Date/signature of customer

_________

Date/stamp and signature of Mercedes-Benz service operation

_________

Vehicle Identification Number (VIN)

Name and address of customer:

_________

_________

_________

Process customer request - standard
Reduction in seat belt warning tone
 
Customer  : Inquiry Via sales to workshop or directly to workshop
 
Workshop:  - Provide information that decisions are made on an individual case basis
  - Check which version of the customer declaration "Replacement of front passenger seat" is relevant
  - Inform the customer about the risks mentioned in the relevant version of the customer declaration "Replacement of front passenger seat"
   
Customer and workshop:  1st Fill out "Facts" form
       
  2. Fill out the customer declaration "Replacement of front passenger seat"
    - Leave modification date blank (important!)
    - Signature of customer + stamp and signature of workshop
  3. Customer identification
    - Copy of ID
    - Copy of the motor vehicle registration certificate
    - Copy of the disabled ID when seat for disabled person installed
 
Send filled out forms (1+2) + copies (3) per fax to decision-maker (GSP/TP).
 
Fax no. +49-(0) 711-30 52 18 28 09
 
Decision-maker (GSP/TPx):  - Archiving of faxed documents (1 - 3)
  - The decision-maker informs the workshop of the codes/code as well as the part number of the adhesive label "No automatic child seat recognition"
     
Workshop:  - Attach  the "No ACSR"  installed on passenger side of instrument panel (as for model 169)
  - Decoding  using code
  - Careful documentation  in the FDOK [vehicle documentation system] (process + person implementing)
  - Now enter  the date on the customer declaration that was previously left blank
  - Copy  the customer declaration
  - Cut off  and stick  the upper section of the original into the operator's manual (start of the chapter on Safety)
  - Send the lower section + copy of the complete customer declaration by fax + by letter to the decision-maker (GSP/TPx)
  - Now enter  into the service booklet
  - Customer's obligation:  Entry in the corresponding vehicle documents (Technical Inspection Association acceptance)
  - Recommendation to the customer:  Notification of the insurance company
     
Decision-maker (GSP/TP):  Archiving
    - the lower section of the original as well as
    - a copy of the complete customer declaration with the decision-maker