LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> A220 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Collision - Sealing And Corrosion Protection - 118 Chassis) >> Sealing And Corrosion Protection General Information >> Seam Seal Notes - Ah97.10-P-0002-02A

Seam Seal Notes - Ah97.10-P-0002-02A

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (4xWD, CAR, Light transporter) 

Seal connecting flange of repaired area with body sealant to prevent corrosion and leakage.

IMPORTANT Seal only on primed body parts.

IMPORTANT Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle attachments, windows and detachable parts free of sealant.

Application of the materials for different application shapes is possible and permissible (structured seams, surface coating, protection against flying rocks and sound deadening).

IMPORTANT The seam seal must not be applied to fresh (not cured) 1K-polyurethane material.

IMPORTANT Maintain drying time for overpainting.

scientia non olet · About LEMON Manuals