Use Of Fine Polishing Paste - AP98.00-P-0638A

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (4xWD, CAR)

With high-gloss varnish paintwork

	Application
1	Wash and dry off vehicle.	Use of car shampoo, insect and tar remover	AP98.00-P-0635-01A
		Car Wash	*BR00.45-Z-1002-04A
		Tar remover	*BR00.45-Z-1020-04A
		Insect remover	*BR00.45-Z-1021-04A
2	Buff out damage locally with a lambskin wheel and fine polishing paste.
	Buffing marks from polishing painted surfaces	Model 123, 124, 126, 129, 140, 163, 168, 170, 201, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 220, 230, 240, 461, 463 up to model year 2019	AR98.00-P-0750-17A
	Buffing marks from polishing painted surfaces	Model 164, 251	AR98.00-P-0750-17GZ
	Buffing marks from polishing painted surfaces	Model 169, 245.2	AR98.00-P-0750-17AK
	Buffing marks from polishing painted surfaces	Model 171	AR98.00-P-0750-17V
	Buffing marks from polishing painted surfaces	Model 199	AR98.00-P-0750-17SLR
	Buffing marks from polishing painted surfaces	Model 216, 221	AR98.00-P-0750-17SX
	Buffing marks from polishing painted surfaces	Model 219	AR98.00-P-0750-17Y
		Guide the polishing machine (buffer) with light pressure and do not tilt it. Failure to do so will result in so-called "buffer swirls". The rotational speed of the lambs wool disk should be between 1500 rpm and 2000 rpm, otherwise the polishing effect is inadequate. Use cork or rubber backing discs. Take care not to rub through the top coat film. Depending on the damage mode, roughen or grind the affected area beforehand with wet abrasive paper (P2000).
		Polish, silicone-free 5 l, DB supply specification 7545.00	*BR00.45-Z-1013-04A
		Gloss preservation, 500 ml, DB supply specification 7551.10	*BR00.45-Z-1014-04A
		Fine polishing paste, polish 1 l, DB supply specification 7543.00	*BR00.45-Z-1015-04A
		Paint cleaner	*BR00.45-Z-1016-04A
		Polish 500 ml	*BR00.45-Z-1036-04A
3	Buff up any visible polishing marks and the entire surface area of the part.	Using the Moltoprene disk without polishing agent. Keep buffing until the luster matches that of the adjacent surfaces.
4	Rub off polish residues.	After drying, buff up with a polishing wad moistened with water. Polishing wad	*BR00.45-Z-1043-04A
5	Buff up the surface manually with polish and a polishing wad.	In order to make polishing work easier, use clean polishing wads or clean polishing cloth while changing them frequently. Polish, silicone-free 5 l, DB supply specification 7545.00	*BR00.45-Z-1013-04A
		Polishing cloth	*BR00.45-Z-1044-04A
6	Rub off polish residues.	After the drying process, a light film is formed on the treated surface. Buff up with a clean polishing wad moistened in water until the surface is clear.
7	Treat the surface with gloss preserver.	Use of gloss preserver Gloss preservation protects the paintwork against premature matting.	AP98.00-P-0641A

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1002-04A	Car Wash	A 001 986 41 71 09
BR00.45-Z-1013-04A	Polish, silicone-free 5 l, DB supply specification 7545.00	A 000 986 45 74
BR00.45-Z-1014-04A	Gloss preservation, 500 ml, DB supply specification 7551.10	A 000 986 44 74
BR00.45-Z-1015-04A	Fine polishing paste, polish 1 l, DB supply specification 7543.00	A 000 986 43 74
BR00.45-Z-1016-04A	Paint cleaner	A 001 986 37 71
BR00.45-Z-1020-04A	Tar remover	A 001 986 40 71
BR00.45-Z-1021-04A	Insect remover	A 001 986 39 71
BR00.45-Z-1036-04A	Polish 500 ml	A 000 986 46 74
BR00.45-Z-1043-04A	Polishing wad	A 000 986 02 62
BR00.45-Z-1044-04A	Polishing cloth	A 000 986 04 62