Sketch Sheet For Paint Damages Form - Of98.00-P-3000-01AB
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118
Store paint sketch sheets so that they are safe from revision!
| Paint | Damaged part text | Corrosion |
|---|---|---|
| 98061 | Engine hood | 88201 |
| 98064 | Roof | 65001 |
| 98065 | Trunk lid | 75001 |
| 98072 | Fuel filler flap | 75101 |
| 98081 | Body, general | |
| 98084 | Engine compartment | |
| 98085 | Underfloor protection | |
| 98086 | Wax for underfloor/cavity preservation | |
| 98141 | Left A-pillar | 63B11 |
| 98142 | Left B-pillar | 63B21 |
| 98143 | Left C-pillar | 63B31 |
| 98144 | Left entrance | 63B01 |
| 98151 | Left front to | 88A01 |
| 98152 | Left front door | 72A01 |
| 98153 | Left rear door | 73A01 |
| 98154 | Left rear fender | 63A01 |
| 98241 | Right A-pillar | 63P11 |
| 98242 | Right B-pillar | 63P21 |
| 98243 | Right C-pillar | 63P31 |
| 98244 | Right entrance | 63P01 |
| 98251 | Right front to | 88N01 |
| 98252 | Right front door | 72N01 |
| 98253 | Right rear door | 73N01 |
| 98254 | Right rear fender | 63N01 |
| 98310 | Engine compartment wax preservation | 98310 |
| 98314 | Trunk/cargo area | |
| 98374 | Trunk lid handle license plate lamp cover |
| Paint | Damaged part text | Corrosion |
|---|---|---|
| 98401 | Front bumper paneling | 88109 |
| 98411 | Outside left side member trim | 69B50 |
| 98412 | Outside right side member trim | 69P50 |
| 98421 | Rear bumper paneling | 88137 |
| 98424 | Right outside mirror | 81P18 |
| 98425 | Left outside mirror | 81B18 |
| Paint | Damaged part text |
|---|---|
| K1 | Dust/dirt inclusion |
| K2 | Rotor |
| K3 | Color deviation |
| K4 | Cloudy |
| K6 | Edge zone marking |
| K7 | Out of position |
| K9 | Paint adhesion problem |
| L1 | Mask edges |
| L2 | Cracks |
| L3 | Preservation residue |
| L4 | Overspray |
| L6 | Blisters |
| L7 | Orange peel development/structure |
| L8 | Grinding scoring |
| L9 | Polishing marks |
| LA | Abrasion |
| LB | Fading |
| LD | Insufficient hiding power |
| Y4 | Separation of the outer and inner surfaces from the core |
| Y6 | Popping |
| Y7 | Crater |