Electrohydraulic Controller Unit - BA27.19-P-1000-01E
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 724.1
ELECTROHYDRAULIC CONTROLLER UNIT
| Number | Designation | Transmission 724.1 | ||||
|---|---|---|---|---|---|---|
| BA27.19-P-1001-01E | Bolt, electrical tandem pump | to valve housing | M5x95 | Stage 1 | Nm | 3 |
| Stage 2 | ∠° | 60 | ||||
| to oil distributor plate | M5x75 | Stage 1 | Nm | 3 | ||
| Stage 2 | ∠° | 60 | ||||
| to GC control unit | Nm | 5 | ||||
| BA27.19-P-1002-01E | Bolt, shift valve housing | to oil distributor plate | M5x35 | Stage 1 | Nm | 3 |
| Stage 2 | ∠° | 60 | ||||
| housing to transmission | M5x60 | Stage 1 | Nm | 3 | ||
| Stage 2 | ∠° | 60 | ||||
| M6x65 | Nm | 8 | ||||
| BA27.19-P-1003-01E | Bolt, GC control unit to valve housing | M4 | Stage 1 | Nm | 2 | |
| Stage 2 | ∠° | 90 | ||||
| BA27.19-P-1004-01E | Bolt, shift valve housing to oil distributor plate | M5 | Stage 1 | Nm | 3 | |
| Stage 2 | ∠° | 60 | ||||
| BA27.19-P-1005-01E | Bolt, spring steel sheet for proportional solenoid to valve housing | Nm | 4 | |||
| BA27.19-P-1006-01E | Bolt, transmission housing to power take-off | M8 | Nm | 29 | ||
| BA27.19-P-1007-01E | Screw/bolt, power takeoff to coupling housing | M8 | Nm | 29 | ||