168 589 03 21 00 Parallel Support - WS27.00-P-0076C
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 700.42, 716.5, 722.3/7/8/9, 724.0/1, 725.0
Transmission 711.651/660/680/683/685
Transmission 716.508/509/513/514, 722.750/751
Transmission 725.1
Use in FG 26/27/Set C
Purpose:
Parallel gauge 400 x 40 x 20 mm for bearing and installation height measurements for drive, output and countershaft in torque converter housing and transmission housing.
For determining the shim size for the dual clutch.
For checking the correct seating of the torque converter after installation on the automatic transmission (transmission 722.9, 725.0/1).