Modify Rear Bumper - AN31.11-P-8080-01MFD

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 247

with code 772 (AMG styling - Front spoiler, side skirts)

except code 871 (Sensor system for trunk lid opening/closing)

Clip rear switch module holder (62) into rear bumper (61) (arrows).
- 2.1 Model 118.651/653/654 Model 247.651
  Rivet rear switch module holder (62) to rear bumper (61) with rivets (63).
  
  The rivets (63) can be found in the parts kit.
- 2.2 Model 118 (except 118.651/653/654) Model 247 (except 247.651)
  Secure rear switch module holder (62) with rear bumper (61) using expansion rivet.
  
  The expansion rivets can be found in the parts kit.
Shown on model 118.651/653/654

Courtesy of MERCEDES-BENZ USA