Repairing Cable Harness By Soldering - AR00.19-P-0100-05A

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All

Fig 1: Identifying New Passenger Vehicle Wiring Harness Repair Kit (220 589 04 99 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Wiring Harness Repair Kit, Basic (000 589 13 99 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Wire Stripper (220 589 01 99 40)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Welding Bead Catcher (129 589 01 98 00)

Courtesy of MERCEDES-BENZ USA

Ensure that lead-free solder is used.

Strip line (2) using wire stripper.
Do not damage, bend or twist wire leads, otherwise a perfect connection cannot be guaranteed.
Fill solder connection (1) in soldering area with soldering paste.

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA
Insert cable (1) into solder connector (2).
Introduce solder (3) into solder connector (2) and make solder connection as per the drawings opposite.
Clean residues from soldering join and contact.

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA